Wall Ties and Restraint Fixings

This is designed as a remedial tie for a separating wall. It will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.

Length:
225mm

Ancon Type A R/R

Suitable for all standard Ancon and Staifix wall ties.

Universal Insulation Clips are for use with standard Staifix stainless steel ties in partial fill cavitiies. Supplied in a bag of 250.

Ancon Universal Insulation Retaining Clip (Bag of 250)

Leviat’s Ancon WHX Wall Ties are available in the following lengths: 150mm, 175mm and 200mm.

Ancon WHX Wall Ties

Staifix Frame Ties are used to join timber doors and window frames directly to brickwork.

Staifix Frame Ties are suitable for use in buildings up to 15m high.

Staifix Frame Ties

The Staifix Insofast ISF18A is a fire-proof steel fixing for securing insulated plasterboards. It is a one piece steel fastener with a dish-profiled head for mechanically securing drywall and insulated plasterboard panels to walls.

Staifix Insofast ISF18A

The Staifix Insofast Standard SDS Adaptor can be used with a standard SDS hammer drill to drive-in ISF18A fixings. The anchor drives directly into aircrete blocks and softwood timber. A 5mm pilot hole is recommended for brick, concrete block and hardwood. A 6mm pilot hole is required for structural concrete and engineered brick.

Staifix Insofast Standard SDS Adaptor

Lengths:
180mm for 40-60mm cavities
200mm for 61-80mm cavities
220mm for 81-100mm cavities

Staifix Resin/Resin (RR)

Staifix RT2 Type 2 General Purpose Wall Ties are suitable for cavities from 50mm to 150mm.

The Staifix RT2 Type 2 General Purpose Wall Ties are CE Marked and can be used in line with NHBC standards.

Staifix RT2 Type 2 General Purpose Wall Ties

The Staifix Universal Wall Starter System is used for joining new walls to existing masonry. The system includes all the necessary fixings (ties, plugs and screws) to join a single skin of masonry 2.4 metres high to an existing wall.

The Ties slide within the strip to course with any masonry unit and this solution is suitable for use in internal and external leaves.

Staifix Stainless Steel Universal Wall Starter Pack

The Staifix Super-7 Alignment Tool is an innovative tool that vertically aligns and centres a nail on the counterbatten to rafter arrangement, improving build quality.

Staifix Super-7 Alignment Tool

The Staifix Super-7 Hand Tool relies on the user to gauge the correct angle of entry of a nail.

Staifix Super-7 Hand Tool

Super-7 nails install flush to the counterbatten. They are manufactured from stainless steel and are engineered with the precise Thor-Helical patented helix, and so provide maximum corrosion resistance and excellent holding power.

Staifix Super-7 Thor-Helical Nail for Pitched Roofs