Channel and Bolt Fixings

Leviat’s Ancon steelgrip simplifies the fixing of masonry support systems to hollow steel sections, or other applications where access is only available from one side. It is a high-performance fixing, available in one size (M12), and is quick to install.

 

Ancon Steelgrip

The CA capsule contains epoxy resin, quartz granules and a hardener, and provides an expansion-free anchorage for the stainless steel studs. These can be used in a variety of solid materials including un-cracked concrete, stone and masonry. Resin options are available for cracked and un-cracked concrete. This product is CE marked.

Capsule Anchors

Supplied in standard 3000mm lengths.

Cast-in Channel 21/18 Omega

Available plain backed for surface fixing or with lugs and infill for casting in.

Supplied in standard 3000mm lengths.

Cast-in Channel 28/15

Supplied in standard 3000mm lengths.

Cast-in Channel 30/20

Available plain backed for surface fixing or with lugs and infill for casting in.

Supplied in standard 3000mm lengths.

This product is CE marked.

Cast-in Channel 38/17

Available plain backed for surface fixing or with lugs and infill casting in.

Supplied in standard 3000mm lengths.

Cast-in Channel 40/25

Available plain backed for surface fixing or with lugs and infill for casting in.

Supplied in standard 3000mm lengths.

Cast-in Channel 49/30

Available plain backed for surface fixing or with lugs and infill for casting in.

Supplied in standard 3000mm lengths.

Cast-in Channel 54/33

Levait’s Ancon Lock 41/27 has teeth cut into the returned lips of the channel. The ‘T’ head bolts used to fix to this channel have a matching serrated surface on the underside of the head which provides a high resistance to slip under shear load along the line of the channel.

Supplied in standard 3000mm lengths.

Cast-in Channel Ancon Lock 41/27

Wavy-tailed U-shaped lugs, welded to the reverse, provide a secure anchorage in concrete. The profile of these lugs has been designed to avoid clashes with reinforcing bars and to aid concrete flow.

Each corner guard is supplied with four M8 set screws to enable it to be fixed to formwork. These fixings utilise the two tapped holes on each leg of the angle.

Cast-In Corner Guards

Wavy-tailed U-shaped lugs, welded to the reverse, provide a secure anchorage in concrete. The profile of these lugs has been designed to avoid clashes with reinforcing bars and to aid concrete flow.

Each corner guard is supplied with four M8 set screws to enable it to be fixed to formwork. These fixings utilise the two tapped holes on each leg of the angle.

Cast-in Corner Guards

Contact Us