Wall Ties and Restraint Fixings

Staifix TE-ITB4 ties are used to enable insulation material to be installed flush to the blockwork. Available in lengths of 185mm for 50-60mm cavities, 200mm for 60-75mm cavities and 225mm for 85-100mm cavities.

Staifix TE-ITB4

Staifix TE-ITC2

Manufactured from stainless steel.

The Staifix Thor-Helical Crack Stitching Bar is 1000mm long and is used for permanently repairing vertical or stepped cracks in masonry.

Staifix Thor-Helical 6mm Dia.1000mm Crack Stitching Bar

The Staifix STF6 Timber Frame Tie is a cranked cavity wall tie for use in the construction of timber-framed buildings. Supplied complete with an annular ring shank nail. Supplied in a box of 250.

Staifix Timber Frame Ties

Contains 3 litres of grout.

A high performance masonry repair grout which is used for permanently repairing vertical or stepped cracks in masonry.

Staifix-Thor Cementitious Grout 3 Litres

The Staifix-Thor Helical Crack Stitching Kit is a high strength, non-disruptive solution for the permanent repair of cracked masonry. The kit contains 10 x 1,000mm stainless steel helical reinforcing bars, 3 litres of cementitious grout, a grout applicator gun with a flat nozzle, a paddle for grout mixing and a finger trowel.

Staifix-Thor Helical Crack Stitching Kit

The Staifix-Thor Helical Finger Trowel can be used to force Cementitous Grout back into cut slots within a mortar joint.

Staifix-Thor Helical Finger Trowel

The Staifix-Thor Helical Grout Applicator Gun is used to apply Cementitous Grout to a cut slot in a mortar joint.

Staifix-Thor Helical Grout Applicator Gun

The Staifix-Thor Helical Paddle for Mixing Grout can be connected to a power drill in order to blend the components of the grout together in the tub before loading into the Staifix-Thor Helical Grout Applicator Gun.

Staifix-Thor Helical Paddle for Mixing Grout

The Staifix-Thor Helical TIM6 is available in four standard lengths. It is suitable for cavities from 50mm to 150mm and can be used with the red Staifix Universal Clip where insulation has to be retained in the cavity. An installation tool is required to hammer the tie into the timber frame. The TIM6 has a cross-sectional area of 6.6mm².

Staifix-Thor Helical Timber Tie, TIM6

Staifix-Thor Helical Timber Ties

The Staifix-Thor Helical TJ2 Tie is ideal for thin-joint blockwork and other applications where the joints in the inner and outer leaves are not aligned. It is hammered directly into aerated concrete blocks, through insulation material, and is built into the bed joints of the outer leaf of brickwork.

Staifix-Thor Helical TJ2 Ties