Wall Ties and Restraint Fixings

Swann Direct provide a wide range of Ancon wall ties and restraint fixings to the construction industry.

Wall ties are used in buildings with cavity walls. They are used to join the two leaves of a cavity wall together, allowing the two parts to act as a homogeneous unit. Hidden from view after construction, wall ties play a vital role in ensuring the stability of a building.

Ancon wall ties are manufactured from corrosion and fire-resistant materials. The fixings are available in a variety of lengths and types for restraining brickwork, blockwork and stonework. Restraints can be fixed to concrete and structural steelwork plus any type of masonry.

Our product line includes the Ancon ST1, Staifix RT2, Staifix HRT4, Ancon ACOU SP-SD, Teplo, Staifix-Thor Helical TIM6, Staifix STF6 and Ancon Timber Frame Movement Tie TFMT7 range. Customers can order low thermal conductivity wall ties, two-part ties, ties for thin-joint blockwork, ties for timber frames, frame cramps, pre-fixing aids, channel ties, vertical movement joints, standard wall ties, non-drill fixings for steelwork, head restraints, acoustic wall ties, restraints for stone cladding and remedial wall ties.

Click here to download our wall ties and restraint fixings catalogue.

This grout-in masonry tie restrains 20 to 30mm thin facings and is suitable for cavities up to 60mm wide. The 12 x 2mm corrugated body provides optimum bond in a 12 x 90mm hole. The 50 x 3mm dowel is supplied loose.

Ancon 150

Ancon 2000 restraint fixings are simple and secure method of fixing thin facing slabs (20-40mm).

Ancon 2000

The Ancon 25/14 Channel has been designed to tie masonry to steelwork, including steel studding.

Ancon 25/14 Restraint System

Ancon AC 31 Wavy Single Triangle Ties are used where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in a bed joint. Ancon AC31 can be supplied with a drip or a neoprene ring.

Ancon AC 31 Wavy Single Triangle Ties

Ancon AC 31C Cranked Wavy Tails are used where bricks are removed then replaced in the outer leaf. Cranked by 25mm to aid fixing to the inner leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in a bed joint. Ancon AC31 can be supplied with a drip or a neoprene ring.

Ancon AC 31C Cranked Wavy Tails

While standard cavity wall ties create a solid connection through which sound waves can travel, Ancon Acoustic Wall Ties feature a highly engineered, pre-compressed, acoustic isolation element.

Products in the Acoustic Wall Tie range provide the necessary structural performance whilst minimising the transfer of airborne noise and vibration.

Suitable for cavity widths up to 175mm.

Ancon Acoustic Wall Ties

Ancon Briclok fits to a column flange and can be used either across a cavity or back into the inner leaf.

The tie must not be forced onto the column and should have no less than 10mm engagement.

Ancon Briclok

Swann Direct offer a range of Ancon Channel Ties including the SP21, SD21 and PP21. These range from 75mm through to 225mm.

Ancon Channel Ties

For use with Ancon plain-ended or safety-ended flat wall ties.

The Ancon Debonding Sleeve is 120mm long and requires 100mm embedment. The sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications. Other lengths and sizes are available on request. Supplied in a pack of 250.

Ancon Debonding Sleeve – 120mm long (Pack of 250)

Ancon Double Triangle Wall Ties are available in lengths of 200mm, 225mm and 250mm.

Ancon Double Triangle Wall Ties

Each restraint provides a design resistance of 1890N.

The Ancon FHR Head Restraint is used for restraining the top of internal walls or the internal leaf of a cavity wall. The two angles clamp the top of the wall and have 10mm diameter holes to suit M8 bolts. Supplied with two holes in the longer angle to allow the restraint to fit the blockwork.

Ancon FHR Head Restraint for a 100mm block

Each restraint provides a design resistance of 1890N.

The Ancon FHR Head Restraint is used for restraining the top of internal walls or the internal leaf of a cavity wall. The two angles clamp the top of the wall and have 10mm diameter holes to suit M8 bolts. Supplied with two holes in the longer angle to allow the restraint to fit the blockwork.

Ancon FHR Head Restraint for a 140mm block

Contact Us