The Ancon 25/14 channel is designed to tie masonry to steel, timber or concrete frames through a layer of insulation. The channel features pre-punched holes at close centres to ensure a fixing position is always located near the end even when it is cut on site. Once the channel is installed, Ancon 25 wall ties, typically SD25, can be positioned at any point along its length and are built into the bed joints of the outer leaf of brickwork.
The Ancon 25/14 restraint system is designed to tie masonry to steel, timber or concrete frames through a layer of insulation. The channel features pre-punched holes at close centres to ensure a fixing position is always located near the end even when it is cut on site. Once the channel is installed, Ancon 25 wall ties, typically SD25, can be positioned at any point along its length and are built into the bed joints of the outer leaf of brickwork.
Ancon AC 31 Wavy Single Triangle Ties from Leviat are used where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole while the triangular end sits in a bed joint. Ancon AC31 can be supplied with a drip or a neoprene ring.
Ancon AC 31C Cranked Wavy Tails from Leviat are used where bricks are removed then replaced in the outer leaf and cranked by 25mm to aid fixing to the inner leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in a bed joint. Ancon AC31 can be supplied with a drip or a neoprene ring.
While standard cavity wall ties create a solid connection through which sound waves can travel, Ancon Acoustic Wall Ties from Leviat feature a highly engineered, pre-compressed, acoustic isolation element.
Products in Leviat’s Acoustic Wall Tie range provide the necessary structural performance whilst minimising the transfer of airborne noise and vibration.
Suitable for cavity widths up to 175mm.